This is the new era of SCSI-capable solid-state Memory Card solutions for your hardware sampler. These are THE NEW SCSI2SD Version 5.1 boards within a handy ultra-small case with an external DB25 jack. They use a regular-sized SD card, and most samplers do not require power. (If they do, simply use a cellphone battery hooked into the included USB port.)
The wonderful aspect of the SCSI2SD Drives is the ability to access up to four SCSI ID's; so it's really 4 drives in 1! This enables better use of at least a 8GB SD card - more efficient, faster access.
Our quality SCSI2SD v5.1 External Drive works with all Ensoniq samplers, and most Akai, Roland, Emu, Ensoniq, Kurzweil, Korg, and Peavey samplers.
Comes ready to plug-and play! Included:
- External Case with SCSI2SD v5.1 board inside with DB25 female SCSI port
- 8GB SD card, setup into 4 ID's of 2GB each, formatted for the sampler of your choice
- SCSI Cable, for the DB25-DB25 select between 2ft, 3ft, or 6ft (2ft and 3ft have adapters on one side so it can be used as a 25-CEN50 cable too)
- 4 rubber feet to optionally put on bottom
- 1-year limited warranty
Please let us know which SCSI Cable you want, and how to format your 8GB SD card, in the section above when ordering.
There are two other models of SCSI2SD, a comparison chart is below.
|Card Type||Max ID's||Power Connector||Form Factor||Other|
|v6.0||SD||7||Floppy-type||Standard||Can use as USB card reader|