ZuluSCSI Extended for Emu Emax is everything ZuluSCSI Blaster is, plus a OLED Display and a Switcher Kit for switching through a nearly-infinite amount of images on a single SCSI ID. This works on both the Emax I and Emax II.
(Currently we have 4 or less available at reduced price.)
Since the Emax's (I and II) have such a tall bezel height (39mm), we were able to fit in both the OLED Control Board with the knob and buttons, and Switcher Kit, and the access to the ZuluSCSI Blaster board - just barely!
The image switching is extremely powerful - set the images up (as many as you want) on the SD card and switch through them using the switcher. The OLED gives you all you want to know about the images - all of them, not just the switched ones - occupying all the SCSI ID's, so you don't have to do it via a computer. Note: the switched images currently are limited to read-only - you cannot write them. This may change in the future.
This is a new era of SCSI-capable solid-state Memory Card solutions for your hardware sampler. This is the RP2350-based ZuluSCSI Blaster board, packaged for internal installation purposes, with a handy standard 3.5 tray, an 18" 50-pin ribbon cable, a regular-sized SD card, and completely set up for your sampler/host to your specifications from the factory.
What makes ZuluSCSI special is that it uses large Image Files on a standard store-formatted SD card for the drives it accesses. This is a significant improvement for proprietary disk formats (Akai, Roland, Ensoniq, Emu, MPC, etc.) and solves the inconvenient issues with SCSI2SD proprietary SD cards. It is far easier and faster to use with a computer.
Incredibly, ZuluSCSI Drives have the ability to access up to seven SCSI ID's; so it's really (7) drives in ONE UNIT! This enables better use of the images on the SD card - more efficient, faster access. And the Extended offers a nearly-infinite amount of images on the switched SCSI ID you set up.
Comes ready to plug-and play! Included:
- ZuluSCSI RP2350-powered board mounted on a 3.5 tray
- Your choice of black, galaxy black (with silver specks), beige, or white tray
- Tray is specially made for your sampler; no gaps in bezel
- Regular 18" 50-pin ribbon, or custom cable for your selected sampler if needed
- 64B GSD card with Emax formatted images; switchable folder for images set up
- Complete instructions and tips
- 1-year limited warranty
